Description
Interior door caracteristics
• Contemporary design entirely made in Quebec.
• Solid-core doors (sound-reduction) for an exceptional durability and a unrivaled sound privacy. (Hollow-core door also avaliable).
• Ultra-resistant paint with semi-gloss finish on door and frame (applied with spray gun).
• Door frame featuring rabbeted jambs for greater sturdiness (2 dimensions: 3 5/8" and 4 5/8"). Our frames are designed with a small lip to facilitate the installation of the finishing door casings, which are required to fully complete the installation. Our frames are not designed to be installed without finishing door casings (drywall return mouldings).
• 1 3/8" door frame depth.
• Door with 4 hinges.
How to Take Measurements?
To ensure the proper installation and operation of your door, we recommend that you call on a professional. However, you may use the following method to obtain an approximate estimate of the dimensions:
- Measure your current door panel to determine the width (26", 28", 30", or 32").
- Measure your current door panel to determine the height (80" or 96").
- Remove interior casings (at the top and on both sides) in order to clearly see the current frame’s measurements.
- Measure the width and the height of the current door frame.
- Measure the wall depth to determine the appropriate door frame size (3 5/8" or 4 5/8").
- Select your door swing direction:
5. Door opening inward. Standing outside, hinges are on the left and the handle is on the right.
6. Door opening inward. Standing outside, hinges are on the right and the handle is on the left.
7. Door opening outward. Standing outside, hinges are on the left and the handle is on the right.
8. Door opening outward. Standing outside, hinges are on the right and the handle is on the left.
Door Handles
Installation Guide
Tools required to install your interior door:
- 4’ or 6’ level
- Drill or screwdriver (Philipps head and Robertson head)
- Pencil
Portatec installation kit includes:
- 6 brackets
- 4 x 3-inch screws (for the 4 hinges)
- 18 small zinc-plated screws (for the door frame)
- 6 black screws for the leveling adjustments (on the drywall)
Step #1
If replacing an existing door, first completely remove the original door (door and frame). Ensure rough opening is at least ½ inch larger and ¼ inch taller than the exterior dimensions of your new Portatec door’s frame.
Step #2
Remove Portatec door from packaging as well as black plastic threaded spindle from handle hole.
Step #3
Remove thin wooden plank at the bottom of the door.
Step #4
Install first 3 anchor brackets on the hinge-side of the door frame (level with the top 2 hinges and bottom hinge) using the small zinc-plated screws (3 per bracket). Ensure both small hooks rest solidly on the frame’s facade and align centre hole of bracket with the small pre-drilled hole in the frame.
Both small hooks solidly resting on door frame.
Centre hole of bracket aligned with small pre-drilled hole in the frame (for 3-inch hinge screw later).
Step #5
Install other 3 anchor supports on the opposite side of the door frame (handle side): first one approximately 8 inches from the top of the door, second one above the handle, and third one approximately 6 inches from the bottom of the door.
Step #6
If flooring is to be installed after the door’s installation, make sure to add 2 wood pieces at the bottom of the door of equal height as the flooring that will be installed.
Step #7
On the hinge side, approximately ½ inch from the edge of the rough opening, use a pencil to mark a point on the wall. Place the 4’ or 6’ level on this mark then trace a vertical line using your pencil from top to bottom, making sure the line is perfectly straight and leveled.
Step #8
Place the door in the rough opening and roughly centre it as best as you can. Starting with the top bracket on the hinge side, use a black screw to screw the bracket in the wall through the oval hole. To make leveling easier, refer to the vertical line traced on the wall and note which bracket notch the line goes through. Then screw in the other 2 brackets on the hinge side, always making sure that the vertical level line goes through the same bracket notch. When screwing the final 3 brackets on the handle side, ensure spacing between the door panel and the frame always remains the same from top to bottom (1/8 inch). Make necessary adjustments through the oval adjustment hole.
Step #9
Completely open the door and, using the 3-inch screws, screw in the pre-drilled holes in each of the 4 hinges. These 3-inch screws must reach the vertical wall studs in order to provide added structure and stability to your door.
Step #10
Remove ¾-inch block from under the door.
Step #11
Finishing trims or casing can safely be installed on the anchor brackets. The anchors will in no way impede the installation of finishing trims.
Interior Door Warranty
Portatec is proud to offer a 5-year limited warranty; this warranty is a testament to the quality workmanship and materials used to manufacture our interior doors. This warranty only applies for normal household use of the product and does not cover any defects resulting from negligence, any incident causing damage, abnormal or commercial use.
This warranty is strictly subject to the terms and conditions stipulated thereafter which are an integral part thereof:
- Portatec offers a 5-year limited warranty, effective as of the date of delivery, upon presentation of a proof of purchase, against all material or workmanship defects, providing the products were used for its intended purpose.
- PORTATEC transfers to the purchaser the interior door manufacturer’s warranty (Masonite). As such, all Portatec doors are guaranteed 1 year against warping no more than 1/4" (6 mm) as measured across the plane of the door.
- Portatec guarantees for a 5-year period the original colour paint or stain against cracking, blistering, or scaling caused by normal use. This warranty does not cover gradual and uniform variations in colour which can occur due to excessive sun exposure. The use of thinners, solvents, powerful cleaners, or abrasives on the surface cancels completely this warranty.
- Variation in the colour or texture, as well as the presence of resin, is an inherent characteristic of natural wood and is not considered a defect under the terms of this warranty.
- Portatec guarantees for a 5-year period the adhesion of applied mouldings (Nobella Collection), as well as the adhesion of wood inserts (Revolution Collection and Passion Collection) and stainless steel strips.
- Portatec guarantees for a 6-month period following the date of delivery against any problem in the functioning of hinges or door handles. Parts shall be replaced only if no abuse or improper installation is detected.
- This warranty does not apply to defects caused by exposure to excessive humidity or condensation.
- PORTATEC transfers to the purchaser the manufacturer’s warranty, if applicable, for all components supplied with the product.
- This warranty does not cover defects resulting from improper installation.
- Portatec offers several door sizes, which may vary +/- 3/16 inches.
Please be advised that this warranty is non-transferable if you resell the product. The original receipt of purchase shall be required for any claim made under the warranty.
Recommendations
Portatec shall not be held responsible for any warping or finish problems if the following recommendations are not followed:
- Warping and swelling may occur, depending on the season and relative humidity, until the doors become conditioned to the humidity and temperature of the home or building.
- Portatec interior doors must be delivered to the site after plaster, drywall or cement is completely dry.
- Hollow-core doors can be more subject to warping than solid-core (soundproofing) doors